ZyXEL g-2000 plusv2 Guia Do Utilizador
ZyXEL G-2000 Plus v2 User’s Guide
Chapter 15 Internal RADIUS Server
191
15.2 Internal RADIUS Server Setting
The INTERNAL RADIUS SERVER Setting screen displays information about certificates.
The certificates are used by wireless clients to authenticate the RADIUS server. Information
matching the certificate is held on the wireless clients utility, for example, Funk Software’s
Odyssey client. A password and user name on the utility must match the Trusted Users list so
that the RADIUS server can be authenticated.
The certificates are used by wireless clients to authenticate the RADIUS server. Information
matching the certificate is held on the wireless clients utility, for example, Funk Software’s
Odyssey client. A password and user name on the utility must match the Trusted Users list so
that the RADIUS server can be authenticated.
ZyXEL recommends that you replace the factory default certificate with one that uses your
ZyXEL device's MAC address. This can be done when you first log in to the ZyXEL device or
in the Advanced web configurator Certificates screen.
ZyXEL device's MAC address. This can be done when you first log in to the ZyXEL device or
in the Advanced web configurator Certificates screen.
Note: The internal RADIUS server does not support domain accounts (DOMAIN/
user). When you configure your
Windows XP SP2
Wireless Zero
Configuration PEAP/MS-CHAPv2 settings, deselect the Use Windows logon
name and password checkbox. When authentication begins, a pop-up dialog
box requests you to type a Name, Password and Domain of the RADIUS
server. Specify a Name and Password only, do not specify a domain.
name and password checkbox. When authentication begins, a pop-up dialog
box requests you to type a Name, Password and Domain of the RADIUS
server. Specify a Name and Password only, do not specify a domain.
Refer to the My Certificates section in the Certifications chapter for information on how to
replace, add or remove certificates.
replace, add or remove certificates.
Click the AUTH SERVER link under ADVANCED and then the Setting tab. The screen
appears as shown.
appears as shown.