ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 19 Introducing the SMT

235

This chapter explains how to access and navigate the System Management Terminal and gives 

an overview of its menus.

The ZyXEL device’s SMT (System Management Terminal) is a menu-driven interface that 
you can access from a terminal emulator through the console port or over a telnet connection. 
This chapter shows you how to access the SMT (System Management Terminal) menus, how 
to navigate the SMT and how to configure SMT menus.

The following procedure details how to telnet into your ZyXEL device.

1 In Windows, click Start (usually in the bottom left corner), Run and then type “telnet 

192.168.1.1” (the default IP address) and click OK. 

2 For your first login, enter the default password “1234”. As you type the password, the 

screen displays an asterisk “*” for each character you type.

Figure 106   Login Screen

3 After entering the password you will see the main menu.

Please note that if there is no activity for longer than five minutes (default timeout period) 
after you log in, your ZyXEL device will automatically log you out. You will then have to 
telnet into the ZyXEL device again. You can use the web configurator or the CI commands to 
change the inactivity time out period. 

The login screen appears after you press [ENTER], prompting you to enter the password, as 
shown next.

For your first login, enter the default password “1234”. As you type the password, the screen 
displays an asterisk “*” for each character you type.

Password : xxxx