ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

248

Chapter 22 LAN Setup

22.2 Protocol Dependent Ethernet Setup

Depending on the protocols for your applications, you need to configure the respective
Ethernet Setup, as outlined below.

• For TCP/IP Ethernet setup refer to the Internet Access Application chapter.
• For bridging Ethernet setup refer to the Bridging Setup chapter.

22.3 TCP/IP Ethernet Setup and DHCP

Use menu 3.2 to configure your ZyXEL device for TCP/IP.

To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu
3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet
Setup, as shown next

Figure 118 Menu 3.2 TCP/IP Setup

Follow the instructions in the next table on how to configure the DHCP fields.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

   DHCP= Server               TCP/IP Setup:
   Client IP Pool:
   Starting Address= 192.168.1.33   IP Address= 192.168.1.1
   Size of Client IP Pool= 32       IP Subnet Mask= 255.255.255.0
   First DNS Server= From ISP       RIP Direction= Both
   IP Address= N/A            Version= RIP-1
   Second DNS Server= From ISP      Multicast= None
   IP Address= N/A          Edit IP Alias= No
   Third DNS Server= From ISP
   IP Address= N/A
   DHCP Server Address= N/A

Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.