ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

252

Chapter 22 LAN Setup

Use menu 3.5 to set up your ZyXEL device as the wireless access point. To edit menu 3.5, 
enter 3 from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 
and then press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next. 

Table 90   Menu 3.2.1: IP Alias Setup

IP Alias 1, 2

Choose Yes to configure the LAN network for the ZyXEL device.

IP Address

Enter the IP address of your ZyXEL device in dotted decimal notation.

IP Subnet Mask

Your ZyXEL device will automatically calculate the subnet mask based on the IP 

address that you assign. Unless you are implementing subnetting, use the subnet 

mask computed by the ZyXEL device.

RIP Direction

Press [SPACE BAR] and then [ENTER] to select the RIP direction. Options are 

Both, In Only, Out Only or None.

Version

Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are RIP-

1, RIP-2B or RIP-2M.

Incoming Protocol 

Filters

Enter the filter set(s) you wish to apply to the incoming traffic between this node 

and the ZyXEL device.

Outgoing Protocol 

Filters

Enter the filter set(s) you wish to apply to the outgoing traffic between this node 

and the ZyXEL device.

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to 

save your configuration, or press [ESC] at any time to cancel.