ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 27 Network Address Translation (NAT)

281

Note: Menu 15.1.255 is read-only.

Now let’s look at option 1 in menu 15.1. Enter 1 to bring up this menu. We’ll just look at the 
differences from the previous menu. Note the extra Action and Select Rule fields mean you 
can configure rules in this screen. Note also that the [?] in the Set Name field means that this 
is a required field and you must enter a name for the set.

Figure 142   Menu 15.1.1 First Set

Note: If the Set Name field is left blank, the entire set will be deleted.

The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1 (described later) 
and the values are displayed here

Table 103   SUA Address Mapping Rules

Set Name

This is the name of the set you selected in menu 15.1 or enter the name of a new 

set you want to create.

Idx

This is the index or rule number.

Local Start IP

Local Start IP is the starting local IP address (ILA).

Local End IP

Local End IP is the ending local IP address (ILA). If the rule is for all local IPs, 

then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255.

Global Start IP

This is the starting global IP address (IGA). If you have a dynamic IP, enter 

0.0.0.0 as the Global Start IP.

Global End IP

This is the ending global IP address (IGA).

Type

These are the mapping types. Server allows us to specify multiple servers of 

different types behind NAT to this machine. See later for some examples.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to 

cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Menu 15.1.1 - Address Mapping Rules
  Set Name= NAT_SET
 Idx  Local Start IP  Local End IP   Global Start IP  Global End IP   Type
 ---  --------------- -------------- --------------- ---------------  ------
  1.
  2.
  3.
  4.
  5.
  6.
  7.
  8.
  9.
 10.
                   Action= Edit          Select Rule=
                   Press ENTER to Confirm or ESC to Cancel: