ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

326

Chapter 32 System Information and Diagnosis

You can set up different port speeds for the console port through Menu 24.2.2 – System 
Maintenance – Console Port Speed. Your ZyXEL device supports 9600 (default), 19200, 
38400, 57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] 
to select the desired speed in menu 24.2.2, as shown in the following figure.

After you changed the console port speed on your ZyXEL device, you must also make the 
same change to the console port speed parameter of your communication software.

Your ZyXEL device provides the error logs and trace records that are stored locally. 

The first place you should look for clues when something goes wrong is the error log. Follow 
the procedures to view the local error/trace log:

1 Type 24 in the main menu to display Menu 24 – System Maintenance.

2 From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.

ZyNOS F/W Version

Refers to the ZyNOS (ZyXEL Network Operating System) system firmware 

version. ZyNOS is a registered trademark of ZyXEL Communications 

Corporation.

Country Code

Refers to the country code of the firmware. 

LAN

Ethernet Address

Refers to the Ethernet MAC (Media Access Control) of your ZyXEL device.

IP Address

This is the IP address of the ZyXEL device in dotted decimal notation.

IP Mask

This shows the subnet mask of the ZyXEL device.

DHCP

This field shows the DHCP setting of the ZyXEL device. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC 

to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Table 117   Menu 24.2.1 System Maintenance : Information

Menu 24.2.2 – System Maintenance – Change Console Port Speed

Console Port Speed: 9600

Press ENTER to Confirm or ESC to Cancel: