ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 3 Wizard Setup

53

This screen allows you to setup a unique name for your ZyXEL device on the wireless 
network. You also decide on the channel for your wireless transmission and what kind of 
security you would like to use.

Figure 7   Enter Name and Select Security

The following table describes the labels in this screen.

Note: The wireless stations and ZyXEL device must use the same SSID, channel ID 

and WEP encryption key (if WEP is enabled) or WPA-PSK (if WPA-PSK is 
enabled) for wireless communication.

Table 5   Enter Name and Select Security

Wireless LAN Setup

Name(SSID)

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the 

wireless LAN. 
If you change this field on the ZyXEL device, make sure all wireless stations 

use the same SSID in order to access the network. 

Choose Channel ID

To manually set the ZyXEL device to use a specific channel, select a channel 

from the drop-down list box. 

Scan

Click Scan to have your ZyXEL device find an available channel.

Security

The level of Security can be selected as none, basic or extended. Choose 

None security to have no wireless LAN security configured and proceed to the 

section. 

Choose Basic (WEP) security if you want to configure WEP Encryption 

parameters. 
Choose Extend (WPA-PSK with customized key) or Extend (WPA2-PSK 

with customized key) security to configure a Pre-Shared Key. 
The next screen varies depending on which security level you select.

Back

Click Back to return to the previous screen.

Next

Click Next to continue.