ZyXEL g-2000 plusv2 Guia Do Utilizador

ZyXEL G-2000 Plus v2 User’s Guide

Chapter 6 Wireless LAN

85

Click the WIRELESS link under ADVANCED to open the Wireless screen.

Figure 24   Wireless 

The following table describes the general wireless LAN labels in this screen.

Table 24   Wireless

Enable 

Wireless LAN

Click the check box to activate wireless LAN.

Name(SSID)

(Service Set IDentity) The SSID identifies the Service Set with which a wireless 

station is associated. Wireless stations associating to the access point (AP) must 

have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII 

characters) for the wireless LAN. 

Note: If you are configuring the ZyXEL device from a computer 

connected to the wireless LAN and you change the ZyXEL 
device’s SSID or WEP settings, you will lose your wireless 
connection when you press Apply to confirm. You must then 
change the wireless settings of your computer to match the 
ZyXEL device’s new settings.

Hide 

Name(SSID)

Select this check box to hide the SSID in the outgoing beacon frame so a station 

cannot obtain the SSID through passive scanning using a site survey tool.

Choose 

Channel ID

Set the operating frequency/channel depending on your particular region. 
Select a channel from the drop-down list box. 

RTS/CTS 

Threshold

Enter a value between 0 and 2432. The default is 2432. 

Fragmentation 

Threshold

Enter a value between 256 and 2432. The default is 2432. It is the maximum data 

fragment size that can be sent. 

Security

See the following sections for information on configuring security.