Sharp MX-5500N Guia De Utilização

A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings 
can be retrieved and used for a copy job by means of a simple operation.
For example, suppose 11" x 17" (A3) size CAD drawings are copied once a month for archive purposes using the 
following settings:

(1) The 11" x 17" (A3) size CAD drawings are 

reduced to 8-1/2" x 11"(A4) size.

(2) The drawings have fine lines that do not 

show clearly, and thus a dark exposure 
setting (level 4) is used.

(3) To reduce paper use by half, 2-sided 

copying is used.

(4) Margin shift is used so that holes can be 

punched for filing.

Set 11" x 17" (A3) to 8-1/2" x 11" (A4) reduction

Change the exposure setting

Select 2-sided copying

Select margin shift

Select punch hole settings

Press the [START] key.

Press the [#/P] key (

).

Touch the stored program key.

Press the [START] key.

Considerable time is required to copy the drawings each 
month because the above settings must be selected.
In addition, mistakes are occasionally made when selecting 
the settings, so some copies must be redone.

The settings are stored in a job program, so they can be 
selected by the touch of a key. This is simple and takes no time.
In addition, the settings are all stored so there are no chances 
for mistakes, and thus no need to redo copies due to setting 
mistakes.

• Up to 48 job programs can be stored. The job programs are retained even if an interruption occurs in the power supply.

• Job programs can also be stored in the Web pages. Click [Job program] and then [Copy] in the Web page menu to store a 

job program.

11" x 17" (A3) size CAD drawings

Copies

or

Exit

Job Programs

Press program number.

1

2

3

Recall

Store/Delete

1

4

4

5

6

7

8

9

10

11

12

or