Sharp XG-C40XU Guia De Utilização

1 Make the necessary connections before pro-

ceeding. Connect the power cord to a wall outlet.
The POWER indicator illuminates red and the
projector enters standby mode.

• If the bottom filter cover is not securely installed, the

POWER indicator flashes.

2 Press Power ON.

• The flashing green LAMP REPLACEMENT indicator shows

that the lamp is warming up. Wait until the indicator stops
flashing before operating the projector.

• If the power is turned off and then immediately turned on

again, it may take a short while before the lamp turns on.

• If the keylock level is set to “Level A” or “Level B”, Power

ON and Power OFF can only be used on the remote
control. (See page 43.)

• After the projector is unpacked and turned on for the first

time, a slight odor may be emitted from the exhaust vent.
This odor will soon disappear with use.

2

When the power is on, the LAMP REPLACEMENT
indicator lights indicating the status of the lamp.
Green: Lamp is ready.
Flashing green: Warming up.
Red: Change the lamp.