Sharp 25n-m180 Guia De Utilização
20
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1
Press
CH UP (
8
) or DOWN (
9
) to move the “
” mark to
“STATUS”, then press
VOL (+) or (–) to activate ON the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
2
Press
MENU, then “INPUT SECRET No.” will be displayed.
3
Enter the 4-digit SECRET No. using the
REMOTE KEYPAD.
4
Press
MENU and SECRET No. is registered.
L
To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1
“V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data the same as you configured.
the program with Program Rating data the same as you configured.
NOTE:
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2
Press
MENU, then “INPUT SECRET No.” will be displayed.
3
Enter the 4-digit SECRET No. using the
REMOTE KEYPAD, then
V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
NOTE:
•
If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
→
1
2
3
4
5
6
7
8
9
0
100
ENTER
1
2
3
4
5
6
7
8
9
0
100
ENTER
Parent Control (V-CHIP Operation Continued)
17-26/25N-M180 w/Imp. Safe
6/1/00, 10:02 AM
20