Sharp lc-19ls410ut Guia Do Utilizador

Adjust the best picture appearance from 

selecting the preset value of 

Standard, 

Movie, Power Saver, User, or Sports.

For a better white balance, use color 

temperature correction.

White with reddish tone

White with bluish tone

• 

User:  

White balance can be adjusted manually 

through the R/G/B Gain between a 

maximum of +100 and a minimum of 

–100 for each color temperature.

Provide various advanced functions for 

optimizing the picture quality.

DNR (Digital Noise Reduction) enables you 

to “soften” the screen representation of 

a weak signal to reduce the noise effect. 

Select effect degrees from

 Low, Medium, 

Strong, Auto, or Off. The default setting 

is 

Medium.

If the receiving signal of MPEG has 

a grained noise depending on the 

compression and conversion, the noise 

may be reduced when using this function.

Automatically adjusts the brightness and 

contrast after analyzing the input signal. 

This function enriches the colors and the 

depth of the picture.

You can adjust the skin color to be more 

natural.

Automatically detects a film-based source 

(originally encoded at 24 frames/seconds), 

analyzes it then recreates each still film 

frame for high-definition picture quality.

When Blue Stretch is selected, the 

brightest part of the screen will be leveled 

down to reduce the saturation.

The Game Mode enhances the gaming 

experience by reducing game controller 

delay.

HDMI Mode only shows and is available 

when HDMI device is connected. Select 

from 

Auto, Graphic, or Video.

• 

 The HDMI input timing is set 

to Video mode or Graphic mode 

automatically
Graphic:

• 

 HDMI input timing set to 

Graphic mode (PC). The image is full 

scan
Video:

• 

 HDMI input timing set to Video 

mode. The image is over scan.
HDMI Mode is only workable for HDMI 

• 

Video & Progressive timing as followed:  

1920x1080p,1280x720p,720x480p, 

720x576p.

When Adaptive Backlight is activated, it 

will automatically optimize the backlighting 

levels for dark scenes.

The VGA adjustment is only available 

when the input source is PC and your 

TV is receiving a computer signal. Select 

Auto Adjust for adjusting the settings 

automatically, or select 

H. Position,  

V. Position, Phase or Clock and use  

c or d to adjust your preference.