Plantronics m3000 Guia De Configuração Rápida
M
3000
BLUETOOTH
™
HEADSET
WELCOME
1
PAIRING– IMPORTANT!
5
REPLACING THE BATTERY
9
USING YOUR HEADSET
6
ADDITIONAL FEATURES
7
TIPS AND SUGGESTIONS
8
CHARGING THE BATTERY
2
GETTING THE PERFECT FIT
3
BASICS: BEFORE YOU GET STARTED
4
Welcome to the leading edge of hands-free and wire-free technology.
Here are the components of your Plantronics M3000 Headset.
Here are the components of your Plantronics M3000 Headset.
INDICATOR (Light)
TALK BUTTON
VOLUME DOWN
VOLUME UP
VOLUME UP
NOTE
: The battery pack for your M3000 is already installed when you
purchase your headset. If the battery pack has been removed, or for
instructions on replacing the battery, see Section 9.
instructions on replacing the battery, see Section 9.
FIG. 2.1 –
CONNECT TO POWER
Connect the included wall charger to AC power
and then to the headset charging jack. In a few
seconds, the
and then to the headset charging jack. In a few
seconds, the
INDICATOR
will light red. Charge
the headset overnight (at least 8 hours) before
first use.
Subsequent charges take just 90 minutes and the
first use.
Subsequent charges take just 90 minutes and the
INDICATOR
will turn green when the headset is
fully charged.
TIPS
: Draining the battery once a month can
improve battery life. Otherwise, it's best to
charge your headset whenever possible.
Avoid charging in excessive heat (above
104ºF/40ºC) or cold (below 50ºF/10ºC).
charge your headset whenever possible.
Avoid charging in excessive heat (above
104ºF/40ºC) or cold (below 50ºF/10ºC).
The headset may also be charged using a car
lighter adapter (optional accessory).
lighter adapter (optional accessory).
The battery used in your headset must be
recycled or disposed of properly. Contact
your local recycling center for proper disposal
instructions.
recycled or disposed of properly. Contact
your local recycling center for proper disposal
instructions.
NOTE
: These features may be available if your phone supports the
Handsfree Profile. Functionality varies depending on the phone model you
have. Refer to your phone user guide for additional information.
have. Refer to your phone user guide for additional information.
IMPORTANT
: If your headset stops responding to button presses, remove
and reinstall the battery as described below.
FIG. 6.1 –
ANSWERING A CALL
Wait for the headset to ring, then
PRESS
and
RELEASE
the headset
TALK
button.
During a call, the headset
INDICATOR
light will flash
green showing a call is in progress.
TRANSFERRING TO THE HEADSET
You can transfer a call from your phone to your
headset by pressing and releasing the headset
headset by pressing and releasing the headset
TALK
button.
ENDING A CALL
To end a call,
PRESS
and
RELEASE
the headset
TALK
button any time during a call.
FIG. 6.2 –
MAKING A CALL
To make a call, dial using your phone’s keypad. To
voice-dial a call from your headset,
voice-dial a call from your headset,
PRESS
and
HOLD
the headset
TALK
button for two seconds.
Refer to your phone user guide for additional
instructions for using a headset.
instructions for using a headset.
FIG 6.3 –
ADJUSTING THE VOLUME
To increase the volume level,
PRESS
and
RELEASE
the
VOLUME UP
button.
To decrease the volume level,
PRESS
and
RELEASE
the
VOLUME DOWN
button.
When the maximum or minimum volume level is
reached, the headset sounds four short tones.
reached, the headset sounds four short tones.
MUTE FEATURE
The mute feature allows you to hear the person you
are calling, however, they cannot hear you.
To mute or un-mute a call,
are calling, however, they cannot hear you.
To mute or un-mute a call,
PRESS
and
RELEASE
the
POWER
/
MUTE
button. Two tones indicate mute
function is on.
When mute is enabled, the headset will sound two
short tones every 60 seconds.
When mute is enabled, the headset will sound two
short tones every 60 seconds.
FIG. 3.1 –
SELECT LEFT OR RIGHT EAR
The headset, as packaged, is ready to be used
on your right ear–a letter R on the earloop is
facing outward.
For left ear usage, simply unsnap the earloop from
the headset by pulling gently at the base of the
earloop ring.
Flip the earloop over (with the letter L facing
outward) and snap it back onto the headset.
on your right ear–a letter R on the earloop is
facing outward.
For left ear usage, simply unsnap the earloop from
the headset by pulling gently at the base of the
earloop ring.
Flip the earloop over (with the letter L facing
outward) and snap it back onto the headset.
FIG. 3.2 –
SLIDE HEADSET OVER YOUR EAR
Using one hand, gently slide the earloop behind
your ear in a twisting motion until you achieve a
snug, comfortable fit.
your ear in a twisting motion until you achieve a
snug, comfortable fit.
FIG. 3.3 –
ADJUST FOR SOUND AND COMFORT
Adjust the microphone so it aligns with
your mouth.
Make sure that the speaker positions correctly on
top of your ear canal and that the earloop does
not cause discomfort.
Your headset, as packaged, is configured with a
small-size earloop. For larger ears, install the larger
earloop included in your package.
your mouth.
Make sure that the speaker positions correctly on
top of your ear canal and that the earloop does
not cause discomfort.
Your headset, as packaged, is configured with a
small-size earloop. For larger ears, install the larger
earloop included in your package.
FIG. 9.1 –
REMOVE COVER
Open the battery compartment by pushing back
on the battery door.
on the battery door.
FIG. 9.2 –
UNPLUG OLD BATTERY
Remove the battery by pulling on the tab to
expose the red and black wires and battery con-
nector. Gently pull at the base of the wires to
unplug the battery.
expose the red and black wires and battery con-
nector. Gently pull at the base of the wires to
unplug the battery.
FIG. 9.3 –
INSTALL NEW BATTERY
To install a new battery, insert the battery plug
as shown in the illustration. Make sure you align
the plugs so they connect easily. Do not force
the connection.
Fold the wire under the battery pack and gently
push the battery in place.
as shown in the illustration. Make sure you align
the plugs so they connect easily. Do not force
the connection.
Fold the wire under the battery pack and gently
push the battery in place.
REPLACE BATTERY DOOR
Replace the battery door by pushing it forward
until it snaps shut.
until it snaps shut.
FIG. 5.1 –
TURN ON BOTH DEVICES
Once both devices are turned on, place the
headset and phone where they are easily view-
able. Make sure the Bluetooth feature of your
phone is turned on.
headset and phone where they are easily view-
able. Make sure the Bluetooth feature of your
phone is turned on.
FIG. 5.2 –
SELECT PAIRING MODE
On your headset,
PRESS
and
HOLD
both the
TALK
and
VOLUME UP
keys for two seconds until the
INDICATOR
light flashes red then green.
Your headset will remain discoverable by other
Bluetooth devices for 60 seconds.
On your phone, search for devices by selecting
Bluetooth devices for 60 seconds.
On your phone, search for devices by selecting
SEARCH
or
DISCOVER
from the Bluetooth
options menu.
Check your mobile phone display and follow
any instructions.
Check your mobile phone display and follow
any instructions.
FIG. 5.3 –
ENTER THE PASSKEY
When prompted by your phone, enter four
zeros (0000). This is your headset passkey.
zeros (0000). This is your headset passkey.
CONFIRM PAIRING
Check your mobile phone display to see if pairing
succeeded and follow any instructions.
succeeded and follow any instructions.
NOTE
: If pairing is not completed within 60
seconds, the headset will return to on/standby
mode.
Refer to your phone user guide and repeat the
pairing process.
mode.
Refer to your phone user guide and repeat the
pairing process.
FIG. 4.1 –
TURNING HEADSET ON AND OFF
To turn your headset on, unplug your headset
from the charger.
from the charger.
PRESS
and
HOLD
the
POWER
/
MUTE
button until the
INDICATOR
flashes green.
The
INDICATOR
will flash green every three
seconds while the headset is on.
To turn your headset off,
To turn your headset off,
PRESS
and
HOLD
the
POWER
/
MUTE
button until the
INDICATOR
flashes red.
FIG. 4.2 –
LOW BATTERY WARNINGS
When the headset is on and battery becomes
low, the headset emits a beep every 20 seconds.
The
low, the headset emits a beep every 20 seconds.
The
INDICATOR
also flashes red when the
battery needs to be recharged.
Recharge the battery as described in Section 2.
Recharge the battery as described in Section 2.
Before using your headset, you
MUST
pair it with another Bluetooth
device, such as a mobile phone. Refer to your mobile phone’s user
guide for specific instructions, or visit www.plantronics.com.
guide for specific instructions, or visit www.plantronics.com.
FIG. 7.1 –
CALL TRANSFER
You can transfer a call back to your phone from
your headset.
your headset.
PRESS
and
HOLD
the
TALK
button.
You will hear a tone when you press the
TALK
button. When you hear a second tone, the call
has been transferred and you may release the
has been transferred and you may release the
TALK
button.
CALL REJECT
While your phone is ringing, you can reject the
call without answering.
call without answering.
PRESS
and
HOLD
the
TALK
button. You will hear a tone when you
press the
TALK
button. When you hear a second
tone, the call has been rejected and you may
release the
release the
TALK
button.
FIG. 7.2 –
LAST NUMBER REDIAL
When making a call, you can quickly dial the last
number called from your headset.
number called from your headset.
PRESS
the
TALK
button twice quickly.
Check the display on your phone for call progress.
Check the display on your phone for call progress.
FIG. 2.1
FIG. 3.1
FIG. 3.2
FIG. 3.3
FIG. 4.1
FIG. 4.2
HOLD FOR
2-4 SECONDS
FIG. 5.1
FIG. 6.1
FIG. 6.3
FIG. 9.1
FIG. 9.2
FIG. 9.3
FIG. 7.1
FIG. 5.2
FIG. 5.3
POWER/MUTE
EARLOOP
SPEAKER
CHARGING JACK
MICROPHONE
HOLD FOR
2 SECONDS
HOLD FOR
2 SECONDS
HOLD FOR
2 SECONDS
FIG. 7.2
PRESS TWICE
PRESS
FIG. 6.2
MUTE
HOLD FOR
2 SECONDS
STOWING YOUR HEADSET
Consider turning your headset off before placing
it in your pocket or bag. If the
it in your pocket or bag. If the
TALK
button is
pressed accidentally, your phone may place an
unintended call.
unintended call.
OUTDOOR USE
Your headset’s noise-canceling feature may make it
difficult for callers to hear you in excessive wind.
Try to find a sheltered location when using your
headset outdoors.
difficult for callers to hear you in excessive wind.
Try to find a sheltered location when using your
headset outdoors.