Brother QL-650TD Manual Do Proprietário

57

STEP

1

STEP

2

STEP

3

STEP

4

)

A lithium battery is supplied in order to maintain the settings for the internal clock when 

the printer unit is not plugged-in to a normal power supply. If the clock settings need to be 

reset every time the printer unit is unplugged from its normal power source, then the 

battery must be replaced. 

For the lithium battery for replacement, purchase CR2032 (recommended manufacturer: 

Hitachi Maxell, Ltd., FDK Corporation, Matsushita Electric Industrial Co.,Ltd., Sony 

Corporation, Toshiba Corporation and VARTA Microbattery Inc.).

• Use only the authorized battery for the printer.

•

Dispose in accordance with all applicable federal, 

state, and local regulations.

•

When storing or discarding the battery, wrap it with 

adhesive cellophane tape etc. to prevent it from short-

circuiting.

•

It is recommended to replace the battery every two 

years.

Once set in the correct position, tighten the 

screw which holds the cutting blade unit in 

place.

Set the DK Roll and close the DK Roll cover.

For details, refer to 

Turn OFF the power of this printer and pull the power cord out of the 

outlet.

Open the DK Roll cover and pull up the roll 

release lever to the up position and remove 

the DK Roll.

Adhesive cellophane tape etc.

Battery

Example of grounding of battery