Delorme pn-20 Guia Do Utilizador

50

You can use the Mark button (the button with a push pin) on the Earthmate GPS PN-20 to mark a 

waypoint at your current GPS location or, if panning, at the cursor position. If you are not panning 

and your are not using GPS, the current map center is used. After you add a waypoint, you can 

customize the waypoint name, coordinates, and comments. The default waypoint name is Wpt 

followed by a 3-digit number (starting with 001) that increases by one for each new waypoint. If you 

edit the name, numbering begins from 001 for the new name. Your most recent name is used until 

you change it.
Use the Waypoint Detail Menu to view comment details, delete the waypoint, center the map on 

the waypoint, move the waypoint to the current GPS location, or create a route to the waypoint. To 

view the Waypoint Details menu, press MENU from a Waypoint Details page.
To Mark a Waypoint
Press the Mark button to place a waypoint. The Waypoint Details Page displays.

•  To use a waypoint symbol other than the default red pin, use the arrow keypad to highlight 

the default waypoint symbol and press ENTER. Then, use the arrow keypad to browse to the 

symbol you want and press ENTER.

•  To change the waypoint label, use the arrow keypad to highlight the default label and press EN-

TER. Use the arrow keypad to enter the new label text. Then, highlight OK and press ENTER.

•  To change the coordinate location of the waypoint, use the arrow keypad to highlight the Co-

ordinates field and press ENTER. Then, use the arrow keypad to highlight the number in the 

coordinate information you want to change. Use the arrow keypad to increase/decrease the 

number. Press ENTER when finished.

•  To change the elevation of the waypoint, use the arrow keypad to highlight the Elevation field 

and press ENTER. Then, use the arrow keypad to highlight the number in the elevation value 

you want to change. Use the arrow keypad to increase/decrease the number. Press ENTER 

when finished.

•  To change the date and time that you added the waypoint, use the arrow keypad to highlight 

the Time/Date field and press ENTER. Then, use the arrow keypad to highlight the number in