Philips 37 Manual Do Utilizador

Página de 57
20
English
Finding the correct viewing 
channel
Before you start ...
Remove the door stop tag on top of the 
disc compartment door.
A
 Press SOURCE button on the main unit 
until ‘DISC SOURCE’ appears on the 
display panel (or DISC on the remote 
control.)
B
 Turn on the TV and switch it to the 
correct video-in channel.  
 You may go to the lowest channel on 
your TV, then press the Channel Down 
button on your TVs remote control until 
you see the Video In channel.
 You may press ° button repeatedly 
on your TVs remote control.
 Usually this channel is between the 
lowest and highest channels and may be 
called FRONT, A/V IN, VIDEO, etc..  
 If you are using a RF modulator, set 
the TV to channel 3 or 4.  
 Refer to your TVs user manual on 
how to select the correct input on your 
TV.
The fi rst screen appears on TV
When you complete the connections and 
turn on this unit to the ‘DISC SOURCE’ 
mode for the fi rst time, you should see 
the welcome message on the TV.  
The next few steps will help you set up your
Ambisound home theater system to match your
listening environment.
Stop: Exit
Continue
Welcome
It is advisable that you make several basic 
settings to optimise the performance of 
this unit.  See the following pages for 
more information.
Getting Started
Setting the speakers 
There are four parameters to adjust the 
speakers: room acoustics, placement, 
height and distance.  Change the speaker 
settings according to your room 
environment and setup. 
A
 Upon seeing the welcome message in 
‘DISC SOURCE’ mode, press cursor right 
key on the remote control to access the 
speaker setup screen. 
 A message on the unit positioning 
appears. 
Ensure that the SoundBar system is always
directly facing you in your listening area.
ds
Continue
Orientation
B
 Press cursor right key to continue.
 { Room Acoustics } menu appears.
Select
Back
Change
Please select the type of walls that surround
your room:
         Hard (Concrete, wood)
         Soft (Curtains, open space)
ds
Room Acoustics
C
 Select the condition of the room and 
press cursor right key to confi rm.
 { Hard } for concrete or wood 
surroundings.
 { Soft } for curtains or an open space 
surroundings.