Philips 55PW9383 Instrução De Instalação
T
his section shows you how to make a basic TV connection
using a cable TV or antenna signal.
If you have cable TV service, you’ll simply connect the coaxial
cable lead-in from the cable TV company to your TV. If you intend
to connect a VHF/UHF antenna, you may need a 300- to 75-ohm
adapter, which is not supplied with your TV.
cable lead-in from the cable TV company to your TV. If you intend
to connect a VHF/UHF antenna, you may need a 300- to 75-ohm
adapter, which is not supplied with your TV.
NOTE: You should be able to buy optional accessories such as a
VHF/UHF antenna or a 300- to 75-ohm adapter at most stores
that sell electronics. Or you can call our Customer Care Center at
1-800-531-0039.
VHF/UHF antenna or a 300- to 75-ohm adapter at most stores
that sell electronics. Or you can call our Customer Care Center at
1-800-531-0039.
1
Connect the Cable TV or antenna signal to the
ANTENNA IN 75
ANTENNA IN 75
Ω jack on the rear of the TV.
NOTE:
If you are using an antenna with a round coaxial
cable (75Ω), then you are ready to connect to the back of
the TV. If your antenna has a flat, twin-lead wire (300Ω),
you must first attach the antenna wires on a 300- to 75-
ohm adapter. Then push the round end of the adapter onto
the ANTENNA IN 75Ω jack on the rear of the TV.
the TV. If your antenna has a flat, twin-lead wire (300Ω),
you must first attach the antenna wires on a 300- to 75-
ohm adapter. Then push the round end of the adapter onto
the ANTENNA IN 75Ω jack on the rear of the TV.
2
Insert the TV’s power plug
into the wall power outlet.
VIDEO
S-VIDEO
L
AUDIO
L
R
INPUT-AV 1
A
CENTER C
ANTENNA IN 75Ω
EX
+
Twin-lead Wire
300- to 75-ohm
Adapter
OR
Coaxial Cable
Lead-in from Antenna
Cable TV
Company
Coaxial Cable
Coaxial Cable
Lead-in from
Cable TV Company
Outdoor or Indoor Antenna
(Combination VHF/UHF)
The combination antenna receives norm
broadcast channels 2–13 (VHF) and 14–6
broadcast channels 2–13 (VHF) and 14–6
1
A
NTENNA OR
C
ABLE
TV
T
he major benefit of this projection television is its large view-
ing screen. To see this large screen at its best, test various
locations in the room to find the optimal spot for viewing.
NOTE: Be sure to allow a free flow of air to and from the perfo-
rated back cover of the set.
rated back cover of the set.
To avoid cabinet warping, cabinet color changes,
and increased chance of set failure, do not place
the TV where temperatures can become excessively
hot—for example, in direct sunlight or near a
heating appliance.
and increased chance of set failure, do not place
the TV where temperatures can become excessively
hot—for example, in direct sunlight or near a
heating appliance.
Magnetic fields,
ers, may cause
ers are placed t
magnetic field s
is no picture dis
ers, may cause
ers are placed t
magnetic field s
is no picture dis
C
ABLES AND
C
ONNECTORS
I
f you are new to making TV hookups, you may want to read
this section. (The cables and connectors discussed are not sup-
this section. (The cables and connectors discussed are not sup-
plied with your set. You can buy them at most stores that sell
audio or video products. Or call our Customer Care Center at 1-
800-531-0039.)
audio or video products. Or call our Customer Care Center at 1-
800-531-0039.)
This publication provides you with examples of basic connections.
See pages 6–17 in the Directions for Use manual for more infor-
See pages 6–17 in the Directions for Use manual for more infor-
A 75-ohm coaxial cable connects signals
from an antenna or a cable TV company
to the antenna jack on the back of the TV.
Coaxial cables use “F” connectors.
from an antenna or a cable TV company
to the antenna jack on the back of the TV.
Coaxial cables use “F” connectors.
A two-way signal splitter enables you to
take a single antenna or cable TV signal
and supply it to two different inputs.
take a single antenna or cable TV signal
and supply it to two different inputs.
A 300- to 75-ohm twin-lead
adapter
adapter
accepts the antenna
cables (called twin-lead wires)
from an antenna, allowing you
to connect the antenna signal to
the TV.
from an antenna, allowing you
to connect the antenna signal to
the TV.
Video and audio cables
with standard RCA
(phono) connectors con-
nect the video and audio
jacks of accessory
devices such as VCRs
and DVD players to the
jacks on the TV.
To simplify making connections, the connectors
are usually color coded. The jacks on your TV are
likewise color coded to match the colors of the
connectors. The coding is as follows: yellow for
video (composite) and red and white for the right
with standard RCA
(phono) connectors con-
nect the video and audio
jacks of accessory
devices such as VCRs
and DVD players to the
jacks on the TV.
To simplify making connections, the connectors
are usually color coded. The jacks on your TV are
likewise color coded to match the colors of the
connectors. The coding is as follows: yellow for
video (composite) and red and white for the right
and left audio c
cable with a wh
or nonstereo, co
video cables use
RGB (high-reso
red, green, and
tions provide yo
and picture reso
An S-Video cab
devices such as
VCRs, or camc
TV. S-Video pro
than regular (co
S-Video cables
compatible acce
nect the left and
Video because t
picture signal, n
cable with a wh
or nonstereo, co
video cables use
RGB (high-reso
red, green, and
tions provide yo
and picture reso
An S-Video cab
devices such as
VCRs, or camc
TV. S-Video pro
than regular (co
S-Video cables
compatible acce
nect the left and
Video because t
picture signal, n