Edge mp3 usb flash drive Guia De Utilização

2) Press and hold the + and – buttons together.  Formatting will begin when the solid red and yellow LEDs

appear together.

3) When the LEDs return to normal (solid red in MP3 mode, solid yellow in REC) formatting is complete.

1) Ensure the USB Disk switch is set to USB.

2) Connect your DiskGO!

TM

 MP3 Player + USB Flash Drive to the computer using an available USB port, then

open “My Computer”.

3) Right-click on the Removable Disk icon for the drive letter corresponding to your device and select

“Format”.

4) Select the file system to use.  If you anticipate using your DiskGO!

TM

 MP3 Player + USB Flash Drive on both

PCs and Macs, use the FAT (not FAT32) file system.

5) If you do not wish to delete the data, or need to back up the data to another device (like your hard drive),

select “Cancel”; otherwise select “OK” to proceed.  The progress bar indicator displays the status of the

format process.  When the format is complete, you will see the following message: “Format Complete!”.

6) Click “OK” to return to Windows.

1) Ensure the USB Disk switch is set to USB.

2) Connect your DiskGO!

TM

 MP3 Player + USB Flash Drive to your computer’s USB port.

3) Once the device appears on your desktop (usually titled “No_Name”), open your computer’s main hard

drive – the one with your active system folder.

4) Open the Applications folder, then open the Utilities folder.

5) Double-click on the “Disk Utilities” icon to launch the program.

6) In the left pane, single-click to select the device named “XXXMB Removable Disk”.

7) Click on the “Erase” tab.  Select the appropriate option for your system.

a.

If you are using your DiskGO!

TM

 MP3 Player + USB Flash Drive on both Macintosh and PC

computers, select “MS-DOS”.

b.

Enter a label for your DiskGO! here, if necessary.

8) Once you have selected the options you wish to use, click the “Erase” button.  Once the Disk Utility is

complete, you can close the Disk Utility and begin using your USB Flash Drive.

Removing the DiskGO! Safely
Please follow the directions below to safely remove your device.

·

Windows 98SE:  Unplug ONLY when the device is in standby mode.  The LED Indicator blinks while reading

and writing data.

·

Windows ME/2000/XP:  Use the “Unplug or Eject Hardware” icon in the system tray to safely stop the

DiskGO! device.

·

MacOS:  Drag the “Removable Disk” icon to the Trash Bin and wait for indication that you can safely

remove the device.

·

Linux:  You can safely remove the DiskGO!

TM

 MP3 Player + USB Flash Drive after you use the “Unmount”

command.

The DiskGO!

TM

 MP3 Player + USB Flash Drive device contains a built-in microphone near the headphone

jack.  The device uses the microphone to save voice recordings to the internal disk as WAV files.  These

recordings can be played back through the device itself, or copied to your computer for playback.

1) Switch the device to Battery

2) Switch the MP3/REC switch to REC.  A solid yellow LED will appear.

3) Press and hold Play/Pause to begin recording.  Recording begins when the LED blinks red and yellow.

4) Press and release Play/Pause to stop recording.  The LED will return to solid yellow.

1) Switch the device to Battery

2) Switch the MP3/REC switch to REC.  A solid yellow LED will appear.

3) Press and release Play/Pause to begin playback.  The LED will blink yellow during playback.

327 East 14th Street / Ada OK 74820 (800) 332-6581 / (580) 332-6581 / www.edgetechcorp.com

EDGE

TM

 is a trademark of EDGE Tech Corp.  Trademarked words or logos used herein are property of their respective owners.