Seagate blackarmor ps 110 Guia Do Utilizador
Chapter 6. Restoring backup data
6.1 Restore under Windows or boot from CD?
As mentioned above (see
), Seagate BlackArmor
Backup can be used in several ways. We recommend that you first try to restore data using
Seagate BlackArmor Backup under Windows, because this provides more functionality. Boot
from the bootable media
Seagate BlackArmor Backup under Windows, because this provides more functionality. Boot
from the bootable media
only if Windows does not start up.
Seagate BlackArmor Backup is loaded entirely into RAM so you can remove the bootable CD
to insert the archive disc.
to insert the archive disc.
Be careful! When you use the Seagate BlackArmor Backup rescue disc, the product creates
disk drive letters that might differ from the way Windows identifies drives. For example, the
D: drive identified in the standalone Seagate BlackArmor Backup might correspond to the
E: drive in Windows. This is not an error with the software.
E: drive in Windows. This is not an error with the software.
6.1.1 Network settings in rescue mode
When booted from removable media, Seagate BlackArmor Backup might not detect the
network. That can happen if there is no DHCP server in your network or your computer
address was not identified automatically.
To enable network connection, specify network settings manually in the window, available at
Tools -> Options -> Network adapters.
network. That can happen if there is no DHCP server in your network or your computer
address was not identified automatically.
To enable network connection, specify network settings manually in the window, available at
Tools -> Options -> Network adapters.
6.2 Restoring files and folders from file archives
This section describes how to restore files and folders from a file backup archive. You can
restore the desired files and folders from a disk/partition image as well. To do so, mount the
image (see
restore the desired files and folders from a disk/partition image as well. To do so, mount the
image (see
) or start the image
restoration and select Restore files or folders.
File backup archives are supported only for the FAT and NTFS file systems.
1. Start the Restore Wizard by selecting Operations -> Restore in the main program
menu.
2. Select the archive.
menu.
2. Select the archive.
40 Copyright (c) 2000-2009 Acronis. All rights reserved.
Copyright (c) 2009 Seagate Technology LLC. All Rights Reserved.