Cleveland ogb-20.20 Manual Do Utilizador

•  When the heat circuit is energized the heat symbol will be energized 

•  The cooking mode symbol will be energized. 

•  The time display will invert and begin to count down. 

b

  The fan circuit is energized by the Control Board (A10) transmitting and 

receiving a signal from terminals 5,6,7 and 8 on connector X10 to terminals 3,4,5 
and 6 of connector X28 on the Gas Board (A20) 
•  The Gas board (A20) Transmits a signal from terminal 4 of connector X26 to 

terminal 2 of connector X12 the Motor Drive (U10) 
◊

  220 VAC 3 phase is sent from the Motor board to the Oven Fan motor 

(M1) 

◊

  Every 120 seconds the rotation of the motor reverses. 

◊

  NOTE:  If the temperature is less than 212 degrees F than fan will be 

pulsed on for 2 seconds every 60 seconds after the cabinet set temp (B6) 
and the bypass probe (B5) are satisfied.