Garmin 4008 Manual Do Proprietário

a

ppendIX

The first time you turn your unit on, you must configure a series of initial settings. These settings 

must also be configured when restoring factory settings (

  NOTE: 

All of these settings can be configured later from the 

 screen.

The initial settings are as follows:
language—select the language that will be shown on your screen.
Welcome—select 

.

Any NMEA devices?—select 

if NMEA devices are or will be connected.

AIS Connection (shown if answer to Any NMEA devices was 

)—select the type of AIS devices 

Position Format—specify the coordinate system that you want location readings to appear in.
Time Format—specify whether you want the time shown in a 

, 

, or 

(Universal Time Code) format
Time Zone—specify your time zone.
Units—specify units for onscreen measurements as 

, 

, or 

.

Minimum Safe Depth—specify the minimum safe depth for your boat. Refer to your boat 

specifications for more information.
Minimum Overhead Clearance—specify the minimum overhead clearance for your boat. Refer to 

your boat specifications for more information.
Zone Alarm (shown if an AIS Connection is indicated)—select 

if you want to set zone alarms 

)

Zone Distance (shown if answer to Zone Alarm is 

)—select the estimated distance of collision 

Zone Time (shown if answer to Zone Alarm is 

)— select the estimated time of collision within 

which you would like a zone alarm to sound (