Garmin 4008 Instrução De Instalação

If your boat does not already have an existing NMEA 2000 network installed, you will need to create a basic NMEA 2000 network. For more 

information on NMEA 2000, visit 

1.  Connect the three included T-connectors together by their sides.
2.  Connect the appropriate terminators to each end of the combined T-connectors.
3.  Wire the included NMEA 2000 power cable to a 12 Vdc power source through a switch. Connect to the ignition switch for the boat if possible.
4.  Connect the NMEA 2000 power cable to the top of one of the T-connectors.
5.  Route and connect the included NMEA 2000 drop cables from the GPS 17x and from the GPSMAP 4000/5000 series chartplotter to the tops

of the other T-connectors.

+

-

  NotE: The diagram shows only the NMEA 2000 data connection to the GPSMAP 4000/5000 series chartplotter. The chartplotter must also be 

.

  NotE: One GPS antenna will provide position data for every device on the NMEA 2000 network. Do not connect multiple GPS antennas if you are 

using multiple chartplotters.