Garmin 4008 Instrução De Instalação

The NMEA 0183 data cable included with the GPSMAP 4000/5000 series chartplotter supports the

 

NMEA 0183 standard, which is used to wire 

various NMEA 0183-compliant devices, such as VHF radios, NMEA instruments, autopilots, or a computer.

These diagrams illustrate basic NMEA 0183 wiring used to connect your GPSMAP 4000/5000 series chartplotter to NMEA 0183-compliant 

devices such as an AIS or DSC device. For more-complete information on the NMEA 0183 capabilities of the GPSMAP 4000/5000 series 

chartplotter, see the section on advanced NMEA 0183 wiring (

).

If the NMEA 0183-compliant device has only one receiving wire (no A, B, +, or -), leave the pink wire unconnected.
If the NMEA 0183-compliant device has only one transmitting wire (no A, B, +, or -), connect the orange/white wire to ground.
Consult the installation instructions of your NMEA 0183-compliant device to identify the Transmit A(+) and B(-) wires and Receive A(+) 

and B(-) wires.
Use 28 AWG, shielded, twisted-pair wiring for extended runs of wire.
Solder all connections and seal the connection with heat-shrink tubing.

•
•
•

•
•