Fortinet FORTIWIFI-50B Instrução De Instalação

The wireless settings to configure on the client are similar to what a wireless user 
needs to use a wireless access point. The information entered is the broadcast 
information from the access point, and enables the FortiWiFi client to be on the 
wireless network.

Go to System > Wireless > Settings.

Select the WLAN interface.

Complete the following and select Apply:

Configure the IP address and routing for the WLAN port.

Go to System > Wireless > Settings.

Select the WLAN interface.

Select Manual to configure a static IP.

or 

If your access point is also a DHCP server, you can use it to set the address and 
the default gateway.

The default gateway is the next hop for data packets leaving the FortiWiFi unit. 
You need to add the default gateway to ensure traffic will get out to the Internet. In 
this case, it is the wireless (WLAN) port of the access point.

If you configured the WLAN port for DHCP, you can configure the default gateway 
automatically.

For details on configuring the gateway see 

You need to add at least two firewall policies to enable the flow of traffic from the 
wireless port (your wireless connection to the access point to the external network 
and the Internet) to the Internal ports (the local network users).

First, create an incoming firewall policy that allows traffic from the internal ports to 
the wireless port, so wireless users can receive data to the Internet.

Go to Firewall > Policy.

Select the blue arrow for WLAN to Internal.

Select Create New. 

Enter the SSID of the access point you are connecting to.

Select the security type for the access point connection.

Enter the key or pre-shared key for the access point.