Fortinet FORTIWIFI-50B Instrução De Instalação

Installing firmware replaces your current antivirus and attack definitions, along 
with the definitions included with the firmware release you are installing. After you 
install new firmware, make sure that antivirus and attack definitions are up to date. 
You can also use the CLI command execute update-now to update the 

antivirus and attack definitions. For details, see the FortiGate Administration 
Guide.

Before you begin, ensure you have a TFTP server running and accessible to the 
FortiWiFi unit.

Make sure the TFTP server is running. 

Copy the new firmware image file to the root directory of the TFTP server. 

Log into the CLI. 

Make sure the FortiWiFi unit can connect to the TFTP server. 

You can use the following command to ping the computer running the TFTP 
server. For example, if the IP address of the TFTP server is 192.168.1.168:

execute ping 192.168.1.168

Enter the following command to copy the firmware image from the TFTP server to 
the FortiWiFi unit: 

execute restore image <name_str> <tftp_ip4>

Where <name_str> is the name of the firmware image file and <tftp_ip4> is 

the IP address of the TFTP server. For example, if the firmware image file name is 
image.out and the IP address of the TFTP server is 192.168.1.168, enter: 

execute restore image image.out 192.168.1.168
The FortiWiFi unit responds with the message: 

This operation will replace the current firmware version!
Do you want to continue? (y/n)

Type y. 
The FortiWiFi unit uploads the firmware image file, upgrades to the new firmware 
version, and restarts. This process takes a few minutes. 

Reconnect to the CLI.

Update antivirus and attack definitions, by entering: 

execute update-now