NorthStar 961x Manual Do Utilizador
Chapter 4 - Understanding the Chart Screen
961 Operations and Reference Manual Rev. D
Page 4-19
Going directly to the cursor position
To go directly to the cursor’s position:
1. Press the CURSOR PAD to move the cursor to the desired
location on the CHART screen, then press the CURSOR
menu key.
menu key.
The SELECTED CURSOR POSITION dialog box
appears.
appears.
Selected cursor position dialog box
2. If desired, you can use the KEYPAD to change the cur-
sor’s coordinates; if not, press the GO NOW key (or press
the CANCEL key to cancel).
the CANCEL key to cancel).
The 961 creates a new, temporary waypoint called
COORD, which isn’t stored in the waypoint database;
instead, it’s placed into the trip, where it replaces any
future trip points. Your present vessel position and time
are now a past trip point. The 961 returns to the CHART
screen, showing the course line to the new COORD way-
point.
COORD, which isn’t stored in the waypoint database;
instead, it’s placed into the trip, where it replaces any
future trip points. Your present vessel position and time
are now a past trip point. The 961 returns to the CHART
screen, showing the course line to the new COORD way-
point.