NorthStar 961x Manual Do Utilizador
Chapter 11 - Using the Trip Function
Page 11-6
961 Operations and Reference Manual Rev. D
•
follow the trip back home by copying old trip points—in
reverse order—to the future part of the trip
reverse order—to the future part of the trip
You can also restart the leg to the active waypoint at the TRIP
screen, but this action doesn’t actually change the trip; for
details, see ”Restarting the track at the trip screen” starting on
page 11-14.
screen, but this action doesn’t actually change the trip; for
details, see ”Restarting the track at the trip screen” starting on
page 11-14.
NOTE:
You can perform most of the functions listed above at the
CHART
screen, since the 961 automatically displays the trip on that same
screen. However, those functions aren’t described here; for details
about modifying your trip on the
screen. However, those functions aren’t described here; for details
about modifying your trip on the
CHART
screen, see ”Using the
Adding and going
directly to a new
waypoint
To add a new waypoint and go directly to it (this deletes any
active and future points):
active and future points):
1. At the TRIP screen press the GO TO NEW COORDS key.
You don’t have to select any particular waypoint,
although the resulting dialog box will be titled as to
which point you’ve chosen—past, active, or future.
although the resulting dialog box will be titled as to
which point you’ve chosen—past, active, or future.
Active trip point dialog box