NorthStar 961x Manual Do Utilizador
Chapter 12 - Alarms, TideTrack, and Currents
961 Operations and Reference Manual Rev. D
Page 12-7
To change the alarm settings:
1. At the ALARMS screen, press the CHANGE SETTINGS
key.
The ALARM SETTINGS are highlighted.
Alarm settings screen
2. Press the CURSOR PAD up or down to highlight the
desired alarm setting.
To turn off an alarm setting, press the ALARM ON/OFF
key. When done, press the ACCEPT key (or press CAN-
CEL
key. When done, press the ACCEPT key (or press CAN-
CEL
to leave the alarm on).
To change the distance setting for the cross-track, arrival
radius, or anchor drag alarms, highlight the desired alarm
setting, then use the KEYPAD to enter the distance at
which you want to be alerted. If necessary, press the LEFT
ARROW
radius, or anchor drag alarms, highlight the desired alarm
setting, then use the KEYPAD to enter the distance at
which you want to be alerted. If necessary, press the LEFT
ARROW
and RIGHT ARROW to move the cursor into the
desired decimal place. When done, press the ACCEPT key
(or press CANCEL to leave the value unchanged).
(or press CANCEL to leave the value unchanged).
Understanding the
alarm audio
The alarm audio for most of the alarms can be turned off,
which means the alarms won’t beep for any of those alarm sit-
which means the alarms won’t beep for any of those alarm sit-