Garmin 3205 Manual Do Proprietário

G

ETTING

 S

TARTED

 > 

U

SING

 S

IMULATOR

 M

ODE

The GPS Setup Tab contains the following options:
Skyview Orientation—allows you to select a sky view display, either North Up 

or Track Up, for the GPS Info sub tab only. 
Source—set to Garmin when using a Garmin sensor (GPS 17); set to NMEA 

when using any other GPS NMEA source.
WAAS—toggles the WAAS capability of the Garmin receiver on or off.
The following soft keys are active only when the unit is not receiving satellites 

and the Source is not set to Garmin:

•  AutoLocate—allows the receiver to find your location automatically. This 

process can take up to five minutes.

•  Set Position—allows you to initialize the receiver graphically or manually 

from the Map Page to initially help the receiver acquire satellites more 

quickly.

Simulator Mode is great for practicing with the unit while inside and satellite 

signals are not available. When the GPSMAP 3205 is in Simulator Mode, the 

GPS receiver is turned off. The unit cannot be used for actual navigation.

  NOTE: Do not try to navigate in Simulator Mode. While in Simulator Mode, 

the GPS receiver is turned off. Any satellite signal strength indicators shown 

are only simulations and do not indicate the strength of actual satellite signals.

1.  Press and hold 

ADJ/MENU to open the Main Menu.

2.  Press up or down on the 

ROCKER to highlight the System tab.

3.  Press right on the 

ROCKER to highlight the General sub tab, highlight the 

System Mode field, and press ENTER.

4.  Highlight 

Simulator, and press ENTER.

When Simulator Mode is active, the message “Simulating Operation” appears in 

the status bar at the top of each page.