Garmin 130 Manual Do Proprietário

U

NIT

 O

PERATION

 > 

R

ADIO

 P

AGE

When a Weather Alert tone is detected, the Rino 130 

automatically turns on the Weather Radio and broadcasts 

the Weather Alert if you are not actively transmitting or 

receiving on the radio. The volume changes to 3/4 the 

maximum when a Weather Alert is broadcast. Select 

Disable Weather Alert to turn off this feature.
To turn the weather radio off, press the 

Thumb Stick 

In when Use FRS/GMRS Radio is highlighted. This 

switches the Rino 130 back over to the FRS/GMRS radio 

operation.

Press the Thumb Stick In on either of these two options 

to toggle them from on to off. For example, to turn GPS 

Off, press the 

Thumb Stick In when Turn GPS Off is 

highlighted.

The Informational Picture on the bottom half of the Radio 

Page features Garmin’s Mr. Mark Waypoint showing 

current GPS and radio status, and radio actions. As you 

operate the unit, the graphics change depending on what 

actions you are taking and the unit settings.

Four satellites are shown on at the top of the picture along 

with descriptive text to indicate GPS reception status. 

As the unit collects satellite information, the satellite 

symbols flash alternately until all four are steady to 

indicate a 3D position fix. The more satellites that are 

steady, the better your position fix.

As radio signals come in, signal wave symbols display to 

the left of Mark Waypoint. Fragmented (or broken) signal 

symbols are shown to indicate activity on that channel. 

Audio remains muted because the incoming signal does 

not match the squelch code your unit is set to.