Raritan T1700 Instrução De Instalação
LCD KVM Console QSG
3
QSG-T1700_T1900-0B-v1.1-E y 255-37-0016-00
Component list
5
M6 washer x 8 pcs
6
M6*15mm screw x 8 pcs
7
M3.2*4.5mm screw x 14 pcs
Installing the Front Mounting Ear x 2 pcs
1. Disassemble the standard front mounting ears carefully.
2. Install the optional front mounting ears with M3.2*4.5 mm
screw x 8 pcs.
Installing into Rack
•
Attach the mounting bracket to vertical mounting rails.
•
Adjust the rear mounting bracket to fit your rack.
•
Repeat the above steps for the other side.
Caution: Leaving the screws slightly loose (not release).
•
Attach support brackets to chassis with M3.2*4.5mm screw
x 3 pcs.
x 3 pcs.
•
Repeat the above step for the other side.
•
Pick up the chassis.
•
Insert inner members of slides into the already mounted
internal slide members in the rack.
internal slide members in the rack.
•
Push the white-arrow button on each slide that is installed
on the LCD keyboard drawer to unlock (Push at the same
time).
on the LCD keyboard drawer to unlock (Push at the same
time).
Caution: Be careful when pushing the chassis into the left
and right slides. Avoid pressing the red button located on
either side of the slide.
and right slides. Avoid pressing the red button located on
either side of the slide.