Planar pl1920m Guia Do Utilizador

 

16

Preparing To Install The Optional Wall Mount Arm (not included) 
This TFT LCD Monitor can be attached to a wall mounting 
arm you can purchase separately. 
Turn the power OFF then disconnect the cables from the TFT 
LCD Monitor before performing the procedure below. 
1. Lay the TFT LCD Monitor face down on a soft surface. 
2. Remove the hinge cover. 
3. Remove the 4 screws holding the stand to the hinge. 
4. Remove the stand. 
 
Attaching The Optional Wall Mount Arm (not supplied) 
Follow these steps to finish installing the wall mounting arm:   
1. Place the wall mounting arm onto the back of the TFT LCD 

Monitor. Line up the holes of the arm with the holes in the 
back of the monitor.   

2. Insert the 4 screws into the holes and tighten.   
3. Reconnect the cables. Refer to the User’s Guide that came 

with the optional wall mounting arm for instructions on 
attaching it to the wall. 

 

NOTE  
•  100mmx100mm VESA high hole (n=4), M4, pitch =0.7 mm 

screw mounting kit not included.     

 

4mm, 0.7 pitch 
threaded holes x 4

100mm x 100mm Screw 

Mounting Options