Planar px2411w Guia Do Utilizador

 

 

 

 9  

    

 

                     

 

 

1.  Make sure that the power cord is the correct type required in your area. 

2.  This LCD monitor has an internal Universal Power Supply that allows 

operation in either 100/120V AC or 220/240V AC voltage area (No user 

adjustment is required.) 

3.  Connect the AC-power cord into your LCD monitor’s AC-power-input. The 

AC-power cord may be connected to either a wall power outlet or the 

power outlet socket on your PC, depending on the type of power cord 

supplied with your LCD monitor. 

 

A certified power supply cord has to be used with this equipment. The relevant 

national installation and/or equipment regulations shall be considered. A 

certified power supply cord not lighter than ordinary polyvinyl chloride flexible 

cord according to IEC 60227 (designation H05VV-F 3G 0.75mm

2

 or 

H05VVH2-F2 3G 0.75mm

2

) shall be used.  As an alternate, a flexible cord of 

synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm

2

) 

shall be used. 

 

The accessory power cord for the Northern American region is the wall plug 

with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for 

the power cord shall be 125 volts AC. 

 

Supplied with units intended for connection to power outlet of personal 

computer: Please use a cord set consisting of a minimum No. 18 AWG, type 

SJT or SVT three conductors flexible cord. One end terminates with a 

grounding type attachment plug, rated 10A, 250V, CEE-22 male configuration. 

The other end terminates with a molded-on type connector body, rated 10A, 
250V, having standard CEE-22

 female configuration. 

Please note that power supply cord needs to use VDE 0602, 0625, 0821 

approval power cord in European counties.