Coby DVD-404 Nota De Lançamento

(DVD202+ CSP62)

Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV 
manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box, 
contact your cable provider or the cable manufacture.  Once your TV is turned to the correct video line, you 
should see the “COBY” logo. 

 

 
ISSUE #2 NO SOUND  

There is a three-prong cord (Yellow, Red and White), Connect ONLY the Yellow prong from the DVD player 
into your TV. If you do not have a Yellow video connection on your TV, you will need to purchase an RF 
Modulator and a four-foot coaxial wire. 
Connect the Red and White wire from the DVD player, audio L & R to the subwoofer INPUT.

Connect the two small speakers to the subwoofer OUPUT. 
You should have a white/blue wire left over, not needed. This white/blue wire is used when connecting the 
speakers system into a 3.5mm jack (Computer, Portable CD player). 
 

The DVD has been set to the incorrect broadcast system.  Press the P/N button on the remote to select the 
correct broadcast system. NTSC is for the United States TV system. 
 

You cannot connect the DVD player through your VCR, TV/VCR combo, Cable or Satellite. 
If you cannot connect directly to the TV via a yellow video input, then you will need to purchase an RF 
Modulator and a four-foot coaxial cable at your local electronics store. 

 
 
If you are still having difficulty setting up your new DVD player, please contact Customer 
Service or Technical Support, Monday-Friday 8:00 AM – 11:00 PM EST, Saturday and 
Sunday 9:00 AM – 11:00 PM EST. You can also reach us online at