Aethra d2061 Manual Do Utilizador
USER’S MANUAL
ADSL TESTER D2061
3.10.2. Running a Tone Generator test
Once defined the setup for Tone Generator test, continue as follows:
1
Select ‘Use this setup for testing’.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the test.
4
To begin to send tones toward the acoustic band.
5
To stop sending tones toward the acoustic band.
6
To send another tone (next), in case of ‘Sweep Time:
Manual’.
Manual’.
6
In order to send the next tone, in case Freq.start is equal
to Freq.stop.
to Freq.stop.
6
In order to send the previous tone, in case Freq.start is
equal to Freq.stop.
equal to Freq.stop.
The test does not provide specific results, the results page displays besides
frequency values transmitted and relative level, all ‘telephonic’ data available on the
line like in MAKE A CALL test.
frequency values transmitted and relative level, all ‘telephonic’ data available on the
line like in MAKE A CALL test.
CHAPTER 3 - PERFORMING A MANUAL TEST
57