ALFA Network aip-w610 Guia Do Utilizador

option steps first. 

 

1. Select a location with access for cables and a power outlet. 

2. Unplug the unit. Place it upside down on a flat surface and mark the two holes for 

anchors. 

3. Installing the Wall mount anchor (plastic) into the wall with tools such as drill or 

hammer. 

4. Insert the provided screws in each hole of the stand parts. 

5. Attaches the unit to the anchors on the wall. 

1. The Router includes two stand parts. 

2. Combine two parts into one stand. Combine it with the side of router near the power 

port. Push the stand up to snap it into place. 

3. Place the Router. 

 

 

1. 

Push the button for more than 5 seconds and then release it, the 
system will return to factory default setting. In the meantime, system 
rewrites flash to default value and Status LED halts for a while. 
Approximately 60 seconds later, the Status LED blinks green 
periodically, now the whole system parameters have returned to 
factory default value. If the process has been interrupted by any 
reason (power off…), the system will fail. Before performing the 
process, ensure a safe operating environment please！ 

2. 

To reboot the Router, Press the button for 2-5 seconds and then 
release it, and all the setting won’t be erased. Wait for the Router to 
complete the reboot, and then you can start to use it. 

 

6 

Warning：Incomplete factory setting recovery procedure will cause the 

Wireless Router malfunction！If you are unfortunately in this 
situation, do not try to repair it by yourself. Consult your local 
distributor for help！