Dwin hd-242 Guia Do Utilizador
10
7. COMPOSITE VIDEO INPUTS (V1, V2)
The V1 and V2 inputs are provided for NTSC (480i) or PAL (580i) video sources,
such as off-air tuners, satellite systems, cable boxes, VCR and DVD players.
The V1 and V2 inputs are provided for NTSC (480i) or PAL (580i) video sources,
such as off-air tuners, satellite systems, cable boxes, VCR and DVD players.
8. COMPONENT VIDEO INPUTS (Y1, Y2, Y3)
Two component video Y, Cr, Cb or Y, Pr, Pb inputs are provided for interlaced
and non-interlaced component video signals from regular DVD players (480i,
580i), progressive component video signals from progressive DVD players
(480p, 580p), and progressive or interlaced HD signals (480p, 540p, 720p,
1080i) from HD sources. The Plasmaimage
Two component video Y, Cr, Cb or Y, Pr, Pb inputs are provided for interlaced
and non-interlaced component video signals from regular DVD players (480i,
580i), progressive component video signals from progressive DVD players
(480p, 580p), and progressive or interlaced HD signals (480p, 540p, 720p,
1080i) from HD sources. The Plasmaimage
™
Processor automatically detects
the resolution and configuration of the component video signal applied to its
input and processes it accordingly.
input and processes it accordingly.
9. AC POWER RECEPTACLE
The AC power receptacle should be connected to a non-switched 120 VAC outlet
using the power cord provided with the Plasmaimage
The AC power receptacle should be connected to a non-switched 120 VAC outlet
using the power cord provided with the Plasmaimage
™
HD system.
DWIN strongly recommends that the Plasmaimage
™
Display and Processor
be connected to the same AC circuit.