Dwin hd-700 Instrução De Instalação
- 18 -
Convergence Memory Purge
During some adjustments, particularly after other service adjustments, you may need to purge, or “dump” the
complete memory of the convergence system.
complete memory of the convergence system.
To empty the memory and start over, you must be at the main Convergence menu.
At that menu press “4” on the remote to select “START OVER”.
The next screen will instruct you to type the word “YES” . Do this using the up and down
/ arrow buttons
on the remote as the letters change on the display. Use the left/right / arrow buttons to move the “typing”
position to the next letter.
position to the next letter.
When you have typed “YES” , press the “ENTER” button and the convergence memory will be emptied. You
may now start the convergence process over from the null settings.
may now start the convergence process over from the null settings.
IMPORTANT NOTE: To protect from unintended memory erasure, the word “YES” must be typed exactly as
shown, in upper case letters before the memory purge will take effect.
shown, in upper case letters before the memory purge will take effect.
-
Convergence-
1. Red
2. Blue
3. View
4. Start Over
5. Signal Level
2. Blue
3. View
4. Start Over
5. Signal Level
Press 'SEL' to select adjustment or cursor
movement.
movement.
To Start convergence over
Type "YES" and then press "Enter"
Type "YES" and then press "Enter"