Pyle plcd68mp3 Manual Do Utilizador
P / N : 570-F78902-01
Page. 3
SETTING CLOCK TIME MANUALLY
Briefly press CLK button until clock time appear on the display.
Press and hold the button until the clock flash and release CLK button.
While clock is flashing, rotate volume control button clockwise to set HOUR and
anti-clockwise to set MINUTE.
8. MUTE CONTROL
Press the button to mute volume control and “MUTE ON” will appear on the display.
9. DISC EJECT BUTTON
Press the button to eject the disc inside disc slot.
10. PANEL RELEASE BUTTON (FIGURE A)
To detach the front panel, press the release button so that the panel fold down from
vertical position to horizontal position and then pull it off of the chassis at horizontal
position.
To re-attach the panel, push the fold-down metal frame forward until it locks to the
original postion. Then, put the panel at the right side of the position first and then press
the left side of the panel until the mechanism lock it into place.
vertical position to horizontal position and then pull it off of the chassis at horizontal
position.
To re-attach the panel, push the fold-down metal frame forward until it locks to the
original postion. Then, put the panel at the right side of the position first and then press
the left side of the panel until the mechanism lock it into place.
11. MODE SELECTION
Press this button to select Radio (TUNER), CD / MP3 (S-CDP), CD Changer Control
(CD-C) and Auxilliary Input (AUX) mode.
(CD-C) and Auxilliary Input (AUX) mode.
12. STEREO/MONO CONTROL
Press this button to select “STEREO” or “MONO” reception.
13. LOUD CONTROL
Press this button to activate the loudness circuitry which compensates for loss of high
and low frequencies during low volume levels.
and low frequencies during low volume levels.
14. LOCAL/DISTANT CONTROL
Press this button to prevent strong local stations from overlapping weaker stations. For
normal operation, press this button again for distance.
normal operation, press this button again for distance.
15. VOLUME / SELECTION CONTROL
Rotate the button anti-clockwise to decrease, or clockwise to increase volume level.
AUDIO LEVEL CONTROL (WHEN PUSHING ONE AFTER ANOTHER)
Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control.
Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control.
VOLUME - Press this button once, then rotate anticlockwise to decrease, or clockwise to
increase volume level.
BASS - Press this button once, then rotate anticlockwise to decrease, or clockwise to
increase bass level.
TREBLE - Press this button once, then rotate anticlockwise to decrease, or clockwise to
increase treble level.
BALANCE - Press this button once, then rotate anticlockwise or clockwise to level balance
of speaker right and left.
FADER - Press this button once, then rotate anticlockwise or clockwise to level fader of
speaker front and rear.
AUDIO / SETTING SELECT (WHEN PUSHING 2 SECONDS)
When pressing the button for more than 2 seconds, it activates as unit setting selection in
cyclical mode as following. The unit setting can be changed byrotating the button clockwise or
anti-clockwise.
When pressing the button for more than 2 seconds, it activates as unit setting selection in
cyclical mode as following. The unit setting can be changed byrotating the button clockwise or
anti-clockwise.
DSP OFF / POP M / ROCK M / CLASS M / FLAT M
ESP 12 / ESP 45 (setting 12 seconds or 45 seconds of electronic anti-shock time
for Audio CD)
BEEP OFF / BEEP ON (not available for this model)
SEEK 1 (tune up/down buttons performs fast tune function) / SEEK 2 (tune up/down buttons
performs auto tuning function when pressed more than 1 second)
COLOR 1 / COLOR 2 (not available for this model)
VOL LAST / VOL ADJ (preset volume level when unit turn on)