Viking Range vhso205 Instrução De Instalação

General Information

• This Built-in Kit is designed for use only with

Viking Microwave Ovens specifying built-in kit
VHTK75SS, VHTK305SS or VHTK365SS on the
rating label on the oven cavity.

• All openings in the wall behind the appliance

or in the floor under the appliance should be
sealed.

• Keep appliance area clear and free from

combustible materials, gasoline and other
flammable vapors.

• When removing the appliance for service,

disconnect AC power supply and carefully
remove the appliance by pulling forward.

• CAUTION: The oven is heavy – use care when

handling!

• The electrical requirements for this oven are 40

volts, 15 amps. The oven has a 6-15 plug and
requires a 6-15 receptacle.

Recommendations for

Unpacking

• DO NOT remove protective packaging until you

are ready to perform the installation.

• DO NOT remove the protective wrapping from

the product control panel until the product is
installed.

Recommendations for

Moving

• The appliance is heavy – use extreme care when

handling!

• WARNING: DO NOT use the handle or oven

door to lift the oven.

Site Preparation

Note: It is recommended that a thorough site
inspection be conducted PRIOR to unpacking and
moving this appliance.

• Confirm available access to adequate power

– see electrical requirements on page 4.

• It is recommended that 3/4" or larger material

be utilized to create a support platform for this
appliance. The floor must support 150 lbs.

• BE SURE that support for this appliance is

perpendicular to the front facing of the wall or
cabinet before you perform the installation.

• All openings in the wall behind the appliance

or in the floor under the appliance should be
sealed.

• Keep appliance area clear and free from

combustible materials, gasoline and other
flammable vapors.

• WARNING: DO NOT USE AN EXTENSION

CORD WITH THIS APPLIANCE. SUCH USE
MAY RESULT IN FIRE, ELECTRICAL SHOCK OR
OTHER PERSONAL INJURY.

Installation