Viking Range dert300-4b Instrução De Instalação
INSTALLATION
INSTRUCTIONS
ELECTRIC RANGES/RANGETOPS
Retain for Future Reference
VIKING RANGE CORPORATION
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
IMPORTANT: PLEASE READ AND FOLLOW
• Before beginning, please read these instructions completely and carefully.
• Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty.
• Please observe all local and national codes and ordinances.
• Please ensure that this product is properly grounded.
• The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future
• Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty.
• Please observe all local and national codes and ordinances.
• Please ensure that this product is properly grounded.
• The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future
reference.
Installation must conform with local codes or in the absence of codes, with the National Electrical Code, ANSI/NFPA 70-latest edition.
In CANADA: Electrical installation must be in accordance with the current CSA C22.2 Canadian Electrical Codes Part 1 and/or local
codes.
In CANADA: Electrical installation must be in accordance with the current CSA C22.2 Canadian Electrical Codes Part 1 and/or local
codes.
GENERAL INFORMATION
1.
WARNING
: The use of cabinets for storage above the appliance may result in potential fire or burn hazard.
Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet storage is to be
provided the risk can be reduced by installing a rangehood that projects horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.
provided the risk can be reduced by installing a rangehood that projects horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.
2.
W
WA
AR
RN
NIIN
NG
G
:: This appliance shall not be used for space heating. This information is based on safety
considerations.
3. All openings in the wall behind the appliance in the floor under the appliance shall be sealed.
4. Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors.
5. Disconnect the electric supply to the appliance before servicing.
6. When removing oven for service and/or cleaning, disconnect AC power supply.
7. Electrical requirements:
4. Keep appliance area clear and free from combustible materials, gasoline, and other flammable vapors.
5. Disconnect the electric supply to the appliance before servicing.
6. When removing oven for service and/or cleaning, disconnect AC power supply.
7. Electrical requirements:
Listed in specifications chart. Electrical installation should comply with national and local codes.
WARNING!!!
ELECTRICAL GROUNDING INSTRUCTIONS
This rangetop must be electrically grounded in accordance with local codes or, in the
absence of codes, with the National Electrical Code, ANSI/NFPA 70-latest edition. .
absence of codes, with the National Electrical Code, ANSI/NFPA 70-latest edition. .
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
BACK TRIM ACCESSORIES
Assembly and installation instructions are included with all back trim accessories.