Viking Range dgcu105-4b Guia Do Utilizador
15
14
Cooktop Features
(DGCU cont.)
P
ro
d
uc
t
C
o
nt
ro
ls
1
5
7
12
6
2
3
4
8
9
10 11
Designer Ceramic 45”W. Six Burner
1. 8,000 Nat./LP (BTU) burner
2. 10,000 Nat./LP (BTU) burner
3. 14,000 Nat./13,500 LP (BTU) burner
4. 6,000 Nat./LP (BTU) burner
5. 12,000 Nat./11,500 LP (BTU)
6. 8,000 Nat./LP (BTU) burner
7. Left front burner control knob
8. Left rear burner control knob
9. Left center burner control knob
10.Right center burner control knob
11.Right rear burner control knob
12.Right front burner control knob
2. 10,000 Nat./LP (BTU) burner
3. 14,000 Nat./13,500 LP (BTU) burner
4. 6,000 Nat./LP (BTU) burner
5. 12,000 Nat./11,500 LP (BTU)
6. 8,000 Nat./LP (BTU) burner
7. Left front burner control knob
8. Left rear burner control knob
9. Left center burner control knob
10.Right center burner control knob
11.Right rear burner control knob
12.Right front burner control knob
Lighting Burners
All burners are ignited by electric ignition.
There are no open-flame, “standing” pilots.
There are no open-flame, “standing” pilots.
Surface Burners-Automatic Reignition
To light the surface burners, push and turn the
appropriate control knob counterclockwise to
any position. This control is both a gas valve
and an electric switch. Burners will ignite at any “ON”
position with the automatic re-ignition system. If
the flame goes out for any reason, the burners will
automatically reignite if the gas is still flowing. When
gas is permitted to flow to the burners, the electric
igniters start sparking. On all surface igniters you
should hear a “clicking” sound. If you do not, turn
off the control and check that the unit is plugged in
and that the fuse or circuit breaker is not blown or tripped.
appropriate control knob counterclockwise to
any position. This control is both a gas valve
and an electric switch. Burners will ignite at any “ON”
position with the automatic re-ignition system. If
the flame goes out for any reason, the burners will
automatically reignite if the gas is still flowing. When
gas is permitted to flow to the burners, the electric
igniters start sparking. On all surface igniters you
should hear a “clicking” sound. If you do not, turn
off the control and check that the unit is plugged in
and that the fuse or circuit breaker is not blown or tripped.
Rear and Front Burners
Push in and turn the control knob counter-clockwise to the desired setting.
The control knobs can be turned to any desired setting as the knobs do
not have fixed positions between “Hi” and “Simmer”.
The control knobs can be turned to any desired setting as the knobs do
not have fixed positions between “Hi” and “Simmer”.
Within a few moments, enough gas will have traveled to the burner to
light. When the burner lights, turn the burner control to any position to
adjust the flame size. Setting the proper flame height for the desired
cooking process and selecting the correct cooking vessel will result in
superior cooking performance, while also saving time and energy.
light. When the burner lights, turn the burner control to any position to
adjust the flame size. Setting the proper flame height for the desired
cooking process and selecting the correct cooking vessel will result in
superior cooking performance, while also saving time and energy.
Note: The igniters may click a number of times before the burner ignites.
This is normal. All igniters will spark regardless of which burner is being
operated.
This is normal. All igniters will spark regardless of which burner is being
operated.
Surface Operation
O
p
er
at
io
n