Viking Range dgrt300-4b Guia Do Utilizador

Página de 6
11
10
Service Information
If your appliance should fail to operate:
1.  Is the electrical cord securely inserted into the electrical outlet?
2.  Is the circuit breaker open, or is fuse blown?
3.  Is there gas supply to the appliance?
If service is required:
1.  Call your dealer or authorized service agency.  The name of the
authorized service agency can be obtained from the dealer or
distributor in your area.
2.  Have the following information readily available:
a.  Model number
b.  Serial number
c.  Date purchased
d.  Name of dealer from whom purchased.
3.  Clearly describe the problem that you are having.
If you are unable to obtain the name of an authorized service agency, or
if you continue to have service problems, contact Viking Range
Corporation at (662) 451-4133 or write to:
VIKING RANGE CORPORATION
PREFERRED SERVICE
111 Front Street
Greenwood, Mississippi (MS) 38930 USA
Record the information indicated below.   You will need it if service
is ever required. The serial number for your built-in wok is located on
the left hand side under the grate support.
Model number:
Serial number:
Date of purchase:
Date installed:
Dealer’s name:
Address:
If service requires installation of parts, use only authorized parts to
ensure protection under the warranty.
THIS MANUAL SHOULD REMAIN WITH THE APPLIANCE FOR
FUTURE REFERENCE.
Spider and Insect Warning!!
Spiders and insects can nest in the burners of this or any other
unit located outdoors and cause the gas to flow from the front of the
burner.  This is a very dangerous condition which can cause a fire to
occur behind the valve panel, thereby damaging the grill and making it
unsafe to operate.
When to look for spiders:
You should inspect the burners at least once a year or
immdiately if any of the following conditions occur:
1.  The smell of gas along with the burner flames appearing yellow.
2.  The gas wok does not reach the proper temperatures.
3.  The gas wok heats unevenly.
4.  The burner makes a popping noise.
Brass Parts
All brass special ordered parts are coated with an epoxy coating.
D
Do
o  N
No
ott  U
Usse
e  B
Brraassss  o
orr  A
Ab
brraassiivve
e  C
Clle
eaan
ne
errss  o
on
n  tth
he
e  B
Brraassss  O
Op
pttiio
on
n  P
Paarrttss..    They
should be wiped regularly with hot, soapy water.  When hot soapy water
will not do the job, use every day household cleaners that are not
abrasive.