Vidikron VP-5000VHD Guia Do Utilizador
Vidikron PlasmaView VHD Installation/Operation Manual
51
PRE
L
Y
Colors in the image are
swapped; for example, reds
appear blue or vice versa.
swapped; for example, reds
appear blue or vice versa.
•
The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to the
wrong inputs on the VHD
Controller.
Blue/Pb outputs from the
source are connected to the
wrong inputs on the VHD
Controller.
•
The Red, Green or Blue
(analog) outputs from the
VHD Controller are
connected to the wrong
inputs on the PlasmaView
VHD.
(analog) outputs from the
VHD Controller are
connected to the wrong
inputs on the PlasmaView
VHD.
•
Ensure that the source
outputs are connected to
the correct VHD Controller
input.
outputs are connected to
the correct VHD Controller
input.
•
Ensure that the VHD
Controller outputs are
connected to the correct
inputs on the PlasmaView
VHD.
Controller outputs are
connected to the correct
inputs on the PlasmaView
VHD.
RGB-HD images appear
“noisy.”
“noisy.”
•
Clock and Phase settings
need adjustment.
need adjustment.
•
Adjust Clock and Phase
settings (refer to ISF Night -
Input Color on page 43).
settings (refer to ISF Night -
Input Color on page 43).
Computer images do not
display correctly.
display correctly.
•
The resolution and
frequency of the video card
in the computer are not
compatible with the
PlasmaView VHD.
frequency of the video card
in the computer are not
compatible with the
PlasmaView VHD.
•
Select a compatible
resolution and vertical
frequency (refer to
PlasmaView VHD
Specifications on page 59).
resolution and vertical
frequency (refer to
PlasmaView VHD
Specifications on page 59).
The image is too large or too
small.
small.
•
Image size needs adjusting.
•
Adjust the image size (refer
to Input Position on
page 40 or Display
Device - Display Position
on page 45).
to Input Position on
page 40 or Display
Device - Display Position
on page 45).
Table 5-1. Troubleshooting Chart (continued)
Symptom
Possible Cause(s)
Solution