Viewsonic VT4236LED Guia Do Utilizador

The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to the 

wall, please consider the following guidelines:

• Read the Important Safety Instructions, at the start of this manual. 
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do not install near heat source, or strong magnetic fields.
• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
• Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LCD TV is already set up for free-standing operation, you need to first remove the stand before

mounting the device to the wall.

To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:

• Disconnect the power and any other cables that might hinder moving the LCD TV. 
• Set the LCD TV on a table or work surface, placing the screen face down on a towel or woolen blanket to 

protect the screen surface from damage while installing plate.

• Before installing the LCD TV on the wall, ensure you have recorded the product serial number on page (i) 

of the User Guide, as you will need the serial number to request service should there be a service need.

• Install the wall mount plate to the LCD TV using screws NO LONGER than 16mm, as longer screws 

found in universal (non-ViewSonic) wall mount kits may damage the power supply causing the unit to fail. 

The wall-mount screw type is M6 x L16.

• Mount the wall mount bracket to the wall ensuring use of proper screws to support the installation. Ensure 

there is at least 3cm of space surrounding any air-vents of your LCD TV to allow adequate cooling during 

operation.

• Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.  

Enjoy your ViewSonic LCD TV!