Viewsonic VPW505 Manual Do Utilizador

Using Component Video Input
1. Connect the green (labeled as “Y”) jack from the 

HDTV Set Top Box  to the green “Y1” jack of the 

display.

2. Connect the red (labeled as “P

R

” or “C

R

”) jack from 

the HDTV Set Top Box to the red “P

R

1/C

R

1” jack of 

the display.

3. Connect the blue (labeled as “P

B

”or “C

B

”) jack from 

the HDTV Set Top Box to the blue “P

B

1/C

B

1” jack 

of the display.

4. Connect the red (R) and white (L) audio jacks from 

the HDTV Set Top Box to the R and L audio-in jacks 

located next to the “P

R

1/C

R

1” connector.

Note:
„ Some HDTV Set Top Boxes may not have a Compo-

nent Video output.  Instead, use RGB input method.

„ There are two sets of component inputs provided.  

You can use either set of component inputs to con-

nect your HDTV Set Top Box.

Using RGB Input
1. Connect the 15-pin D-Sub RGB connector 

from the back of the HDTV Set Top Box to 

the RGB-IN Connector located on the back of 

the display.

2. Connect the red (R) and white (L) audio-out 

jacks from the HDTV Set Top Box to the R 

and L audio-in jacks located to the left of the 

S-Video connector.

Note:
„ Some HDTV Set Top Boxes may not have a 

RGB output.  Use Component Video input 

method if this is the case.

„ Upon connecting your HDTV Set Top Box to 

the RGB input of the display, it may be neces-

sary to adjust various picture settings on the 

display to correctly match the output of the 

HDTV Set Top Box (see page 24).  This is 

caused by the different video timings set by 

various HDTV Set Top Box manufacturers.