Lexmark T656dne Guia Do Utilizador

Page Protect

On
Off

Lets the printer successfully print a page that may not have printed

otherwise
Notes:

Off is the factory default setting. Off prints a partial page when

there is not enough memory to print the whole page.

On sets the printer to process the whole page so that the entire

page prints.

Do Not Restore
Restore Now

Returns the printer settings to the factory default settings
Notes:

Do Not Restore is the factory default setting. Do Not Restore

keeps the user-defined settings.

Restore returns all printer settings to the factory default

settings except Network/Ports menu settings. All downloads

stored in RAM are deleted. Downloads stored in flash memory

or on a printer hard disk are not affected.

1–999

Specifies a default number of copies for each print job
Note: 1 is the factory default setting.

Tray <x>
Manual Feeder

Sets a default paper source for all print jobs
Note: Tray 1 (standard tray) is the factory default setting.

Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)

Stacks the pages of a print job in sequence when printing multiple copies
Note: On is the factory default setting.

1 sided
2 sided

Controls whether the job prints on one side or both sides of the paper
Note: 1 sided is the factory default setting.

Off
On

Specifies whether print jobs are stapled
Notes:

This menu item is available only when the StapleSmart II Finisher is installed.

Off is the factory default setting. Print jobs are not stapled.

Understanding printer menus