Lexmark T656dne Guia Do Utilizador

The printer is using a serial cable connection. The serial port is the active communication link.

Touch Continue to delete the specified job.

Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible.

Load the specified staple cartridge into the finisher to clear the message and continue stapling.

Load the specified staple cartridge in the finisher to clear the message.

Remove the stack of paper from the standard exit bin to clear the message.

Wait for the message to clear.

The printer is now in a lockout mode because:

You attempted to log in too many times with an incorrect PIN

You attempted to log in using an incorrect password number for access to a printer feature, setting, or menu that

you do not have access to.

Note: There is a defined limit on the number of login attempts. Once the limit is reached, this message appears and

the printer enters a lockout mode. The message remains on the printer control panel, and any further attempts to

enter menus is denied until the defined time out expires. The time out duration is set by your system support person.
Wait for the message to clear once the time out expires, and then:

Enter the correct PIN to access any held jobs

See your system support person if you need a password number to enter a specific printer feature, setting, or

menu that is blocked from your use without the number.

Load paper in the tray to clear the message.

Load paper in the specified tray to clear the message.

Understanding printer messages