Lexmark T656dne Guia Do Utilizador
2
Insert the Software and Documentation CD.
3
Click Install.
4
Click Agree.
5
Click Suggested.
6
Click Wireless Network Attach.
7
Connect the cables in the following order:
a
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable
so you can print wirelessly.
b
If your printer has faxing capabilities, then connect the telephone cable.
8
Follow the instructions on the computer screen to complete the software installation.
9
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step
8 for each computer.
Installing the printer on a wireless network (Macintosh)
Before you install the printer on a wireless network, make sure that:
•
An optional wireless card is installed in your printer.
•
Your wireless network is set up and working properly.
•
The computer you are using is connected to the same wireless network where you want to set up the printer.
Prepare to configure the printer
1
Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address
in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
MAC address: ___ ___ ___ ___ ___ ___
2
If your printer has faxing capabilities, then connect the telephone cable.
Additional printer setup
45