Lexmark T656dne Guia Do Utilizador
4
In the Power Saver box, type in the number of minutes you want the printer to wait before it enters Power Saver
mode.
5
Click Submit.
Using the printer control panel
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
.
3
Touch Settings.
4
Touch General Settings.
5
Touch the down arrow until Timeouts appears.
6
Touch Timeouts.
7
Touch the arrows next to Power Saver Mode to select the number of minutes you want the printer to wait
before it enters Power Saver mode.
before it enters Power Saver mode.
8
Touch Submit.
9
Touch .
Adjusting the brightness of the display
To save energy, or if you are having trouble reading your display, you can adjust the brightness of the display.
Available settings range from 20–100 percent brightness. The factory default setting is 100 percent.
Available settings range from 20–100 percent brightness. The factory default setting is 100 percent.
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
2
Click Settings, and then click General Settings.
3
In the Screen Brightness box, type in the brightness percentage you want for your home screen.
4
Click Submit.
Using the printer control panel
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
.
3
Touch Settings.
4
Touch General Settings.
5
Touch the down arrow until Screen Brightness appears.
6
Touch the arrows to select a setting.
7
Touch Submit.
8
Touch .
Minimizing your printer's environmental impact
64